Basic Laminate Flooring
Installation
|
| It is important to note that there are specific installation instructions for every manufacturer of laminate flooring. Though many of these installation procedures are
similar there are differences, and not adhering to these differences could void the warranty on your laminate flooring. So again it is very important to follow the instructions for installation from the manufacturer.
The best place to purchase
laminate flooring with a low price assurance is
InternetFloors.com
|
There are some similarities:
|
- You will need a level sub-floor (with no voids greater than 3".)
- High spots can be sanded down.
- Low spots can be filled in.
- You must allow for 1/4" gap between all walls.
- You should allow your laminate flooring to acclimate to its surroundings.
- Allow several days for the laminate flooring to adjust to the room.
- You should use the specific products listed in the manufacturer's installation instructions; as this will give you the best looking finished floor and ensure that you do not void the manufacturer's warranty on your new laminate.
|
The basic idea in laying laminate flooring:
|
- Prepare the floor so that it is level.
- Remove baseboards if necessary.
- Lay the appropriate underlay material.
- Find the center-point of the room.
- Start at the center-point and work towards the walls.
- Remember to leave 1/4" gap between walls and flooring.
- Cut pieces as necessary to fit obstacles (doorways, counters, etc)
- Make sure that all planks or tiles fit tightly.
- Re-install baseboards if removed.
- Install new baseboards or shoe moldings to cover wall gaps.
- Clean the floor as recommended.
- Enjoy!
|
For Manufacturer Specific
Installation Instructions:
|
|
